Design & Engineering

3D Design & Simulation

Through SolidWorks we offer a comprehensive 3D design solution that consists of powerful simulation and design validation, as well as ECAD /MCAD collaboration, reverse engineering, and advanced wire and pipe routing functionality.

With SolidWorks Simulation we can provide a full range of simulation capabilities to ensure product robustness. It goes beyond core simulation and expands the virtual test environment to product durability and natural frequencies, heat transfer and buckling, and pressure analysis and complex loading. It also includes tools for simulating nonlinear and dynamic response and dynamic loading.

PV Elite & Fluent

PV Elite is a complete solution for vessel and heat exchanger design.

DATA COLLECTION

PV Elite makes defining pressure boundary conditions for vessels and exchangers easy, even for load sets that require significant data input.

ANALYSIS OPTIONS

PV Elite performs calculations in accordance with ASME Section VIII Divisions 1 & 2, PD 5500 and EN 13445. Rules from API579 (Fitness for Service) are also included for evaluating the current state and remaining life of existing vessels.

OUTPUTS AND REPORTS

To simplify inspection requirements, PV Elite lists the most important equations such as required thickness and maximum allowable working pressure (MAWP) and also groups results by type (e.g. internal pressure, external pressure, bending stress, nozzles and flanges). Overall results are summarized where the element or detail controlling the overall vessel MAWP is identified.

MATERIALS AND CODES

PV Elite is a global package with international code rules plus extensive region-specific content.

Rig Maintenance

HEMT has the required certification and manpower to repair, refurbish and service on-shore/off-shore drilling rigs and related equipment.

• API Q1
• ISO/TS 29001
• ISO 9001:2008
• API Spec 7K : Draw works Components
• API Spec 8C : Hoisting Sheaves, Traveling Blocks and Hook Block
• API Spec 4F : Crown Block Assembly, Substructure @ PSL 1&2

Fabrication

HEMT has a fully equipped fabrication shop, capable to carry out fabrication of various types of process equipments like pressure vessel, heat exchangers, separator, columns etc. We have expertise in fabrication of various types of structural works, water tanks, fixed type water tanks, diesel tank, frack tanks, etc.

HEMT also has expertise in fabrication of equipment / items for oil and gas industry as mentioned below.

• API Q1
• ISO/TS 29001
• ISO 9001:2008
• API Spec 7K : Draw works Components
• API Spec 8C : Hoisting Sheaves, Traveling Blocks and Hook Block
• API Spec 4F : Crown Block Assembly, Substructure @ PSL 1&2

Analisa dan Perencanaan Struktur

Perencanaan struktur bangunan adalah analisis yang dilakukan untuk menentukan dimensi maupun spesifikasi struktur bangunan sebelum pelaksanaan pembangunan dimulai. Analisa perencanaan meliputi seluruh bagian struktur bangunan, dari bagian bawah sampai atas struktur.

Arsitama memberikan Jasa Analisa dan Perencanaan Struktur Bangunan, yang dimana dikerjakan oleh tim ahli. Sehingga menciptakan bangunan atau hunian yang aman dan nyaman.

Mekanikal dan Elektrikal

Mekanikal elektrikal adalah sekumpulan struktur mekanis yang membutuhkan tenaga listrik untuk penopang bangunan sehingga dapat difungsikan secara optimal oleh penggunanya

Arsitama menerima Jasa Mekanikal dan Elektrikal sebagai berikut:
Instalasi Listrik, mulai dari Pemasangan Panel Utama Tegangan Menengah, Transformator, Panel Utama Tegangan Rendah, Panel Distribusi, Kabel Feeder, Lampu Penerangan Dalam Gedung, Lampu Penerangan Luar Gedung, Lampu Penerangan Jalan Umum, Saklar, Stop Kontak dll.